The Active Cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. It combines a large metal heatsink with a variable-speed blower, again powered and controlled via the fan connector, and attaches to the Raspberry Pi 5 PCB via sprung pins into a pair of mounting holes.


  • Single-piece anodised aluminium heatsink
  • Heatsink-mounted, temperature-controlled blower fan attached by three screws
  • Spring-loaded push pins for mounting onto Raspberry Pi 5
  • Pre-applied thermal pads for heat transfer

Important notes:

We recommend that the Active Cooler is not removed once it is fitted to Raspberry Pi 5. Removal of the Active Cooler will cause the push pins and thermal pads to degrade and is likely to lead to product damage. Discontinue use of the Active Cooler if the push pins are damaged or deformed, or if they do not clip securely.


  • Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5
  • Fan speed control: Pulse width modulation control with tachometer
  • Maximum airflow: 1.09 CFM
  • Maximum fan speed: 8000 RPM +/- 15%
  • Product material: Anodised aluminium


Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.